chain tensioner मीनिंग इन हिंदी

उदाहरण वाक्य

1. The following year, QBP entered the emerging single-speed bike market with its in-house designed Singleator chain tensioner.
2. The engine was affected by an oil sludge problem and premature timing chain tensioner failure, which were fixed around 2002-2004.
3. Distinctive components made by Surly include the chain tensioner, and the " Large Marge, " one of the first production fatbike rims.
4. Sports model engines are identifiable via the lack of a cam chain tensioner bolt and the revised valve covers which feature black painted stripes and satin alloy flat areas.
5. After about 100, 000 miles of operation, the chain may stretch to the point that the hydraulic-operated chain tensioner cannot take up any more slack.
6. In 1982 the engine had the balancing cam sprocket driven rather than chain making the engine quieter and a six-speed gearbox was introduced with an automatic cam chain tensioner.
7. The disadvantage is that on a bicycle without a rear derailleur but with vertical dropouts, the chain tension cannot be adjusted by moving the wheel forwards or backwards, and needs another means of chain-tensioning, by a derailleur, chain tensioner, or rear hub.
8. In industry, it is usual to monitor the movement of the chain tensioner ( whether manual or automatic ) or the exact length of a drive chain ( one rule of thumb is to replace a roller chain which has elongated 3 % on an adjustable drive or 1.5 % on a fixed-center drive ).
9. Two duplex chains drive the camshafts, one from the crankshaft to a sprocket at the level of the combustion chambers, and one from the sprocket to each camshaft . The original sprung slipper design of the lower cam chain tensioner proved to be too weak and after a couple of years was changed to an improved hydraulic design, using engine oil pressure.
10. Horizontal dropouts at both spacings are becoming more and more common in stock bikes as they eliminate the need for a chain tensioner, making the bike lighter ( The chain is tensioned by moving the wheel backwards in the dropouts; vertical dropouts are designed to hold the wheel in one position only and therefore require a separate means of tensioning the chain to accommodate wear ).